1 hp 1750 RPM 56C Frame 90 Volt DC Electric Motor with Control Dayton # 1F798
- Part #
- Gift Wrapping
- 53.00 LBS
- Calculated at checkout
- 1 hp 1750 RPM, 90VDC
- 10.0 Full Load Amps
- Class F Insulation
- NEMA 56C Frame Keyed Shaft 5/8" Diameter x 1 7/8"
- TEFC - Totally Enclosed Fan Cooled
- C-face with Removable Rigid Base
- One Year Manufacture Warranty
Permanet Magnet Motor. No wiring required: simply plug 110V 3-conductor cord on control into standard AC receptacle. Control is mounted to end bracket of motor, but can be removed for remote mounting, if desired. Control supplies power to a matched, permanent magnet motor through an additional 8-ft. 3-conductor cord set. Powerful motor features convenient external access to motor brushes. Input voltage: 115, 60/50 Hz . Speed control regulates speeds within 5% of nameplate RPM and provides full-wave rectification. Built-in features include minimum and maximum adjustable speed, current/torque limit, and fixed IR compensation. Additional features include: soft start acceleration, transient and surge protection, and fused (front panel mounted) control protection. Control circuitry is located on one printed circuit board. Control has Forward On/Off/Reverse On switch, and Power-On indicator light.