Leeson Electric Motors

The Only Complete online Electric Motor - Swimming Pool Pump site on the Internet
Toll Free 1-877-986-6867
Burton, Michigan USA 48529

Swimming/Pool Spa Pumps

Dayton
3.3" Diameter Electric Motors
Air Over Motor

  • All angle self-aligning sleeve bearings
  • Continuous Duty
  • Service Factor = 1.0
  • Thermally Protected
  • Ambient 40°C
  • 60 hz.

3M537

3M726

4M195

4M298
       
       

    Shaft Reducer Bushings

Model #

Mtg
Pattern

  Description

Shaft Rotation
Facing Shaft
Stud
Location
Amps 60hz
Volts
Cost
Open Air Over Motor
4M298 4 1/125HP, 3000RPM 1/4"x7/8" CCW Flange 0.5 115 $66.39
3M534 1 1/100HP, 1550RPM 1/4"x2" CW SE 0.7 115 $43.51
3M535 1 1/100HP, 1550RPM 1/4"x2" CCW SE 0.7 115 $41.19
3M536 1 1/100HP, 1550RPM 1/4"x2" CW 2BE 0.7 115 $42.36
4M192 1 1/100HP, 1550RPM 1/4"x2" CCW 2/OSE 0.5 115 $47.98
3M537 1 1/100HP, 3000RPM 1/4"x2" CW 2BE .06 115 $44.25
3M538 1 1/70HP, 1550RPM 1/4"X2 1/16" CW 2/BE 0.7 115 $39.98
3M539 1 1/70HP, 1550RPM 1/4"X2 1/16" CCW 2/BE 0.7 115 $39.98
3M540 1 1/70HP, 3000RPM 1/4"x2" CW SE 0.6 115 $46.44
3M541 1 1/70HP, 3000RPM 1/4"x2" CW OSE 0.6 115 $48.31
3M542 1 1/50HP, 1550RPM 1/4"x2" CW 2/BE 0.9 115 $45.91
4M193 2 1/50HP, 1550RPM 1/4"x2" CCW OSE 0.8 115 $49.27
3M726 1 1/50HP, 1550RPM 5/16"X2" CW SE 0.5 230 $65.87
3M729 1 1/50HP, 3000RPM 1/4"x2" CW SE 1.0 115 $46.44
3M543 1 1/40HP, 1550RPM 5/16"X2" CW 2/BE 1.1 115 $42.98
3M544 1 1/40HP, 1550RPM 5/16"X2" CCW 2/BE 1.1 115 $42.98
3M722 1 1/40HP, 1550RPM 5/16"X2" CW SE 1.1 115 $63.46
3M724 1 1/40HP, 1550RPM

5/16"X2 1/16"
Double Shaft

CW 2/BE 1.2 115 $76.13
3M545 1 1/40HP, 3000RPM 1/4"X2 1/16" CW 2/BE 0.9 115 $47.39
3M728 1 1/40HP, 3000RPM 1/4"X2 1/16" CW SE 1.2 115 $59.28
3M730 1 1/40HP, 3000RPM 1/4"X2 1/16"
Double Shaft
CCW 2/BE 1.0 115 $52.89
3M546 2 1/30HP, 1550RPM 5/16"X2" CW 2/BE 1.1 115 $48.98
3M549 2 1/30HP, 1550RPM
2-Speed
5/16"X2 1/16" CW SE 1.2 115 $61.28
3M777 1 1/30HP, 3000RPM 5/16"X2 1/16" CW SE 1.2 115 $62.99
3M725 1 1/30HP, 3000RPM 5/16"X2 1/16" CW SE 0.6 230 $67.44
4M195 5 1/25HP, 1550RPM 1/4"x2"
Double Shaft
CW 2/BE 1.8 115 $64.55
4M300 1 1/25HP, 3000RPM 1/4"x1" CW SE 1.9 115 $79.24
3M083 2 1/20HP, 1550RPM 1/4"X2 1/16"
Double Shaft
CCW 4/BE 1.8 115 $64.98
3M547 2 1/20HP, 1550RPM 5/16"X2" CW 2/BE 1.8 115 $53.47
3M778 2 1/20HP, 1550RPM
Old # 8M209
5/16"X2" CW SE 1.8 115 $66.70
4M301 3 1/15HP, 1550RPM 5/16"X1 3/4" CCW 3-LUG 2.7 115 $64.98
3M548 2 1/15HP, 3000RPM 5/16"X2" CW SE 2.2 115 $52.98
 
Shaded Pole Motor - Open Air Over Motor
3M558 1 1/100HP, 1550RPM 1/4"X2 1/16" CW 2/BE 0.7 115 $45.99
3M560 1 1/70HP, 1550RPM 1/4"x2" CW 2/BE 0.7 115 $53.90
3M561 1 1/70HP, 1550RPM 1/4"x1.5" CCW 4/SE 0.7 115 $53.28
4M299 1 1/70HP, 3000RPM 1/4"X1 1/8" CW 2/SE 0.6 115 $67.23
3M562 1 1/40HP, 1550RPM 5/16"X2" CW 2/BE 1.0 115 $53.47
3M563 1 1/40HP, 1550RPM 5/16"X2" CCW 2/BE 1.0 115 $60.49
2PUX4

Old # 3M564 (Fasco)
2PUX4 Dayton brand-made in China
Vibrator Motor
Shaded Pole, Open Enclosure
1/200 HP, 1550 Nameplate RPM
Force 2.50 lb., Velocity 1.33 in./sec.
Full Load Amps 0.5, 115V, 60 Hz.
Strap-Type Mounting, Sleeve Bearings, Thermal Protection Auto
Ambient Temperature 40 Degrees C; B Insulation Class
Body Dia. 3-5/16 In.; Overall Length 3-1/4 In.
Includes 9 Ft Long 3-Conductor Cord Set with In-Line On/Off Switch
Standards UL Recognized (E37403), CSA Certified (244617)

115 $39.97
D1130

Fasco Brand Vibrator Motor
This is the original motor made for Dayton-made in Mexico
1/200HP, 1550RPM, .5 amps
Open Ventilated
Length 3 1/4 In
with 8' Long 3-conductor cord; with in-line on/off switch

115 $106.48
10C904

Mounting Bracket for Vibrator Motor
Includes Bolt and Nut to Secure Base to Motor
Old # 2C703, 2PUX5

$7.89

1999-2014 All rights reserved Electric Motor Warehouse
Prices and data subject to change without notice
Electric Motor Warehouse is a registered trademark of Winans Inc.
“For specific trademark and copyright information regarding this site, contact my trademark and copyright attorney

Trademarks & Logos are copyrighted property of their respective owners
We recommend that all electric motors be installed by a qualified licensed contractor.
Disconnect power before attempting to service any electrical apparatus
 

  Home | Contact us | Security | Policies |  Privacy |Testimonials