Dayton
Electric Motors
90 and 180 Volts DC
Permanent Magnet Motors with Controller

Permanent magnet DC motor has matched speed controller attached to end bracket of motor with 3-conductor cordset for plugging into standard AC receptacle.

Controller supplies DC power to motor through an additional 8', 3-conductor cordset, allowing remote mounting of controller when removed from motor end bracket.

C face mount with removable rigid base.

TEFC Ball Bearings - Class F Insulation Continuous Duty - Rotation = CW/CCW

Service Factor = 1.0 - Forward  on/off/reverse on switch - Soft Start Acceleration

Input Voltage: 115VAC or 230VAC, 60/50hz.