Dayton
Universal Type AC/DC 115 Volts 60hz.
115 VAC Only
Non-Reversible
|
|
Full-load speeds can be adjusted 20 to 100% with proper seed control (sold separately)
Average brush life is about 300 hours. Motors are series-wound. Gray hammer finish.
These motors will not operate on DC power
UL Recognized.
Input Voltage 115VAC, 60hz.
Thermal Protection None |
| |
SKU |
Model # |
HP |
Rotation |
RPM |
Bearings |
Shaft |
Amps |
Price |
|
 |
2M066EMW |
2M066 |
1/15 |
CCW |
5,000 |
Sleeve |
1" X 1/4" x 1"
Double Shaft |
1.2 |
$68.59 |
|
Overall Length = 5-7/16"
Length Less Shaft = 4-7/16"
Body Dia. = 2-3/4"
Base 2 3/16" x 3" O.C. Mounting |
 |
2M033EMW |
2M033 |
1/15 |
CCW |
5,000 |
Sleeve |
1/4" x 3/4" |
1.2 |
$55.27 |
|
Side with Two Tapped Size 10-32 Holes, 2 3/16" O.C. on One or Both Sides Mounting
Overall Length = 5-3/16"
Length Less Shaft = 4-7/16"
Body Dia. = 2-3/4" |
|
|
2M277EMW |
2M277 |
1/15 |
CCW |
5,000 |
Sleeve |
1/4" x 3/4" |
1.2 |
$67.83 |
|
Side with Two Tapped Size 10-32 Holes, 2 3/16" O.C. on One or Both Sides Mounting
Overall Length = 5-3/16"
Length Less Shaft = 4-7/16"
Body Dia. = 2-3/4" |
|
|
2M057EMW |
2M057 |
1/15 |
CCW |
5,000 |
Ball |
5/16" x 7/8" |
1.2 |
$84.55 |
|
Side with Two Tapped Size 10-32 Holes, 2 3/16" O.C. on One or Both Sides Mounting
Overall Length = 5-3/16"
Length Less Shaft = 4-7/16"
Body Dia. = 2-3/4" |
|
|
2M034EMW |
2M034 |
1/15 |
CW |
5,000 |
Sleeve |
1/4" x 3/4" |
1.2 |
$60.40 |
|
Side with Two Tapped Size 10-32 Holes, 2 3/16" O.C. on One or Both Sides Mounting
Overall Length = 5-3/16"
Length Less Shaft = 4-7/16"
Body Dia. = 2-3/4" |
|
|
2M037EMW |
2M037 |
1/10 |
CCW |
8,000 |
Ball |
1/4" x 7/8" |
1.5 |
$94.16 |
|
Side with Two Tapped Size 10-32 Holes, 2 3/16" O.C. on One or Both Sides Mounting
Overall Length = 5-3/16"
Length Less Shaft = 4-7/16"
Body Dia. = 2-3/4" |
 |
2M139EMW |
2M139 |
1/5 |
CCW |
10,000 |
Sleeve |
5/16" x 1" |
2.9 |
$95.98 |
|
Stud with Two Size 8-32 Threaded Studs Extending Out Shaft Endshield, 2 7/16" O.C.
Overall Length = 5-1/2"
Length Less Shaft = 4-1/2"
Body Dia. = 3-3/8" |
 |
2M145EMW |
2M145 |
1/2 |
CCW |
10,000 |
Ball |
3/8" x 1 3/16" |
6.3 |
$191.31 |
|
Mounting: Bottom with Four Tapped Size 10-32 Holes, 2" x 2 13/16" O.C.
Overall Length = 7-7/16"
Length Less Shaft = 6-3/16"
Body Dia. = 3-3/4 x 3-1/2" |
|
Replacement Brushes for 2M145 |
 |
1R393 |
$15.92 |
|
|
 |
2M191EMW |
2M191 |
1 |
CCW |
10,000 |
Ball |
7/16" x 1 1/4" |
12.1 |
$303.87 |
|
Mounting: Face with Four Tapped Size 10-32 Holes, 3 1/4" OC 90 Degrees Apart
Overall Length = 9-1/32"
Length Less Shaft = 7-25/32"
Body Dia. = 3-7/8" |
AC/DC Speed Control for Above Motors
Will not work with 2M139, 2M145, 2M191
 |
Adjustable Speed AC Motor Control, Input Voltage 120, Output Voltage 120, 60/50 Hz, Max Amps 2.5, 1/4 HP Max. For Use With Universal, Shaded
Pole and PSC Motors on Fans, Blowers, Pumps, Vibratory Feeders, Heating and Lighting, Features Controls Most Single Phase AC
Motors and Restrictive Loads, Not Equipped to Handle Capacitor Start Motors, Includes Speed Pot with On/Off Switch, 2 Leads with Bare Ends
Dart Controls Model AC03-05S
Length 2", Width 1 1/2", Depth 1 3/32"
Replaces Dayton 4X796
|
Shown with Dial & Cover
Click to enlarge |
|
Motor ship wgt 3 lbs. except 2M145, 2M191 = 10 lbs.
Rotation = Facing the Shaft |
|
