Leeson Electric Motors

The Only Complete online Electric Motor - Swimming Pool Pump site on the Internet
Toll Free 1-877-986-6867
Burton, Michigan USA 48529

Swimming/Pool Spa Pumps

Carbonator Pump Motors

Century Electric Motors

Features:
Automatic Overloads Sleeve Bearings Split Phase1.0 Service Factor Special Shaft Class B Insulation 48Y Frame
One Year Warranty

 


Click to enlarge Picture

 

Motors have a threaded conduit hole. Short, slotted shaft for close-coupling the carbonator pump to the motor.
Extended hub for direct-mounting.
Uses: Liquid transfer pumps, vending machine pumps, and other hub mounted pump applications.
These motors are designed for use on the carbonated beverage and drink dispensers used by restaurants and bars


Coolant pumps for welders are another application where this motor is used.

Catalog #

Sale  
CB2024AV1
  • 1/4 hp, 1725 RPM
  • 4.4 amps, 115 volts
  • Rotation: Reversible
  • Overall Length = 8.1"
  • Ship Weight 13 lbs.
    GE # 4725, Dayton 3K067, 4FG41
$124.89
CB2024AD
  • 1/4 hp, 1725 RPM
  • 4.0/2.0 amps, 115/230 volts 50/60 hz.
  • Rotation: CW Shaft End
  • Overall Length = 8.1"
  • Ship Weight 16 lbs.
    GE # H344, Dayton 5XB85, 6K160
$118.33
CB2034A
  • 1/3 hp, 1725 RPM
  • 6.2 amps, 115 volts
  • Rotation: CW Shaft End
  • Overall Length = 8.6"
  • Ship Weight 15 lbs.
    GE # 4406, Dayton 3K068, 4FG42
$111.23
CB2034AD
  • 1/3 hp, 1725 RPM
  • 4.6/2.3 amps, 115/230 volts 50/60 hz.
  • Rotation: Reversible
  • Overall Length = 8.6"
  • Ship Weight 16 lbs.
    GE # 4805, Dayton 3K987
    5K887, 5U256
$118.32
CB2054AD
  • 1/2 hp, 1725 RPM
  • 6.8/3.4 amps, 115/230 volts 50/60 hz.
  • Rotation: Reversible
  • Overall Length = 8.8"
  • Ship Weight 15 lbs.
    GE # H684, Dayton 5U258
    3K090, 3K596, 4FG45
$137.19
Overall Length = Total Length including shaft

Rotary Gear Pumps - Carbonator Mount

Cast Iron Bronze

 

Intermittent-duty pumps all include a pressure
relief valve. Bidirectional (reversible) motor driven
pumps have thermal overload protection.
Rotary Gear Pumps—Carbonator-Mount

Max. operating pressure: 100 psi
Mechanical seals
Max. viscosity: 500 SSU
Self-priming
6 Month mfgr. Warranty
CAST-IRON
Max. Temp.: 280°F
Designed for oil-based fluids. Pumps have steel
spur gears and shafts with a Viton mechanical
BRONZE
Max. temp.: 210°F
All have carbon graphite bushings and Buna N
mechanical seals; handle water-based fluids.
Other wet-end parts are: bronze, brass, carbon
graphite, vellumoid, and Buna N, as well as 303,
17-7, and 18-8 stainless steel.
Catalog #  
4KHR1 1/3hp motor required, 1/4" port size, 2.2 GPM
Suction Lift 3.2' Cast Iron Pump
Ship Weight 6 lbs.
Old # 6PA26
$177.80
4KHP8 1/3hp motor required, 1/4" port size, 2.2 GPM
Suction Lift 3.2' Bronze Pump
Ship Weight 6 lbs.
Old # 6PA24
$185.42
4KHR2 1/2hp motor required, 3/8" port size, 4.4 GPM
Suction Lift 3.6' Cast Iron Pump
Ship Weight 6 lbs.
Old # 6PA27
$183.16
4KHP9 1/2hp motor required, 3/8" port size, 4.4 GPM
Suction Lift 3.6' Bronze Pump
Ship Weight 6 lbs.
Old # 6PA25
$189.90

Carbonator Pump and Motor Assembly

  • 1725 RPM
  • Open Drip Proof
  • 6 month mfgr. warranty
Catalog #  
4KHP6 1/3hp motor, 1/4" port size, 2.2 GPM
Suction Lift 3.2' Cast Iron Pump
6.0 amps, 115 Volts, 60hz.
Ship Weight 35 lbs.
Old # 6PA31
$327.60
4KHP4 1/3hp motor, 1/4" port size, 2.2 GPM
Suction Lift 3.2' Bronze Pump
6.0 amps, 115 Volts, 60hz.
Ship Weight 35 lbs.
old # 6PA29
$365.40
4KHP7 1/2hp motor, 3/8" port size, 4.4 GPM
Suction Lift 3.6' Cast Iron Pump
8.2/4.1 Amps, 115/230 Volts, 60hz.
Ship Weight 35 lbs.
Old # 6PA32
$352.80
4KHP5 1/2hp motor, 3/8" port size, 4.4 GPM
8.2/4.1 Amps, 115/230 Volts, 60hz.
Suction Lift 3.6' Bronze Pump
Ship Weight 35 lbs.
Old # 6PA30
$361.20

1999-2013 All rights reserved Electric Motor Warehouse
Prices and data subject to change without notice
Electric Motor Warehouse is a registered trademark of Winans Inc.
“For specific trademark and copyright information regarding this site, contact my trademark and copyright attorney

Trademarks & Logos are copyrighted property of their respective owners
We recommend that all electric motors be installed by a qualified licensed contractor.
Disconnect power before attempting to service any electrical apparatus
 

  Home | Contact us | Security | Policies |  Privacy |Testimonials