Leeson Electric Motors

The Only Complete online Electric Motor - Swimming Pool Pump site on the Internet
Toll Free 1-877-986-6867
Burton, Michigan USA 48529

Leeson Electric Motors

NuTone / Broan Replacement Bath Vent Fan Motors
AO Smith Replacement Motors

 

These motors are common to many various Bath, Kitchen, Attic and Gable Vent fans - not just Nutone / Broan
115 - 120 Volts • 60hz •  non-reversible
Bolt Circle - 2.85" (this is common to all 3.3" motors)
Motors without plugs have 6" electrical leads

These are suggested Nutone / Broan replacement motors - be sure to verify all the specs with your Nutone/Broan motor
These may not be "exact" replacement motors
You may have to cut the shaft or the extra mounting studs-they cut easily with a hack saw.

Click Here for: Fan Blades - Wheels - Grilles - Accessories

This is Page 1

Page | 1  | 2 | 3 | 4 | 5 | 6 | 78 |

This page represents our universal/generic replacement motors that fit 100's of vent fans

Universal Fan Motor Kit

Universal Bathroom Replacement

Bath Room Fan Replacement Motor Kit Available in 115 V or 115/230 V
Motor is mechanically reversible.
Shipped CW Shaft end
Mounting studs 1 7/8" on center
6" leads - no plug

Kit contains Motor, 2 fans (1=4", 1=5"),
hub adapter, screws, H-bracket, washers
and wire nuts.
Cross Ref: Fasco K670, Universal J670, Dayton 4M987, C65878

Bath Room Fan Replacement Motor Kit
click to enlarge

Dimensional Drawing

. 65 amps, 3000RPM
115 volts, 60hz
Motor is mechanically reversible.
Shaft = .181" x 1 1/2"
1/2" Coil stack Continuous duty, Air Over

50 CFM Vent Fan Kit
Mounting studs 1 7/8" on center
Kit contains (1) 4.5" Fan & Motor

C01670
.4 amps 115 Volts

$24.91

9/16" Coil Stack
Shaft 3/16" x 1.42"

 

C01675
1.0/.5 amps 115/230 Volts

$33.98

1" Coil Stack
Shaft 3/16" x 2 1/8"

 

C01575
115 Volts

$22.95
 
Be sure to Scroll Down the Complete Page to Review the Motor Selections
*Rotation is determined by looking at the shaft end of the motor
Shaft Bushing

If you need 5/16" shaft on motors with a 1/4" shaft
We have a shaft bushing 1/4" to 5/16" that will solve the problem
More Shaft Bushings

KIT240
 
$3.15
 
 

Note: Extra studs can be cut off with a hack saw or side cutters
If the shaft is too long it can also be cut off with a hack saw

   

Nutone Blower Wheel:
Dimensions: 6.25" x 2"; for 1/4" shaft
For Counter Clockwise Rotation (facing shaft)
Material = Plastic
5901A, 5901A000

  Part # 5900RDC
$8.75
 

Replacement rubber mounting rings for use with
Nutone motor #'s 370, 633, 636, 509, 540, 541, 597
Packaged two per kit
Pictured bracket is for display purposes only-not included

Part #  Kit 187
 
$8.37
 

    Shaft Rotation*    
  • 1/85 HP

  • 3000 RPM

  • .6 amps 115 Volts 60hz.

  • Air Over Motor

  • Motor Length less shaft:
    D200 = 2"
    D201 = 2 1/4"

Clockwise
Shaft: 2 3/8"x1/4"x3/4"

Part # D200
$39.98
 

Counter Clockwise
Shaft: 1/4" x 1 3/8"
Part # D201
$39.98
 

Nutone Motor
  • 1/100 HP

  • 1550 RPM

  • .73 amps 115 Volts 60hz.

  • Shaft Size: 1/4 "x2 1/4"

  • 3.3" Diameter Motor

  • Motor Length less shaft: 2"

  • Air Over Motor

  • 2-Prong 115 Volt plug

Universal Fan Replacement Motor
Dimensional Drawing
Studs can be cut off as needed.
Shaft can be shortened with hack saw

Shaft Rotation* Part # 692

$49.98 

 
Clockwise
Nutone 86322
JA2C394, JA2C394N
 

Counter Clockwise
Nutone 54257, 58123
19446, JA2B066B
JA2B066
Fasco D541
Part # 693

$49.98 

 

  • 1/40hp 1500 RPM 3-Speed

  • 1.3 Amps, 115 Volts 60 hz.

  • Shaft: 4" x 1/4" x 4" Double Shaft

  • Stud Mount - Bolt Circle - 2.85"

  • Motor Length Less Shafts = 2 1/2"

  • 3.3" Diameter

Double Shaft

Part # D128

$65.32

 

This is a versatile motor.
Shaft can be cut off to obtain needed rotation
Studs can be cut off as needed.
If you only need one speed, just use that speed,
tape the unused wires.

  • 1/60 HP

  • 3000 RPM

  • .75 amps 115 Volts 60hz.

  • 3.3" Diameter Motor

  • Motor Length less shaft: 2 3/8"

  • 11" wire leads-no plug

  • Air Over Motor

Universal Fan Motor Replacement such as Kitchen Exhaust Fans and many others

Clockwise
Shaft Size:
1/4" x 1 3/4"
JB1C005N
26758
Part # D402

$46.63

 

Counter Clockwise
Shaft Size:
1/4" x 2 1/4"
Part # D403

$46.63

 

  • 1/40 HP

  • 3000 RPM

  • .92 amps 115 Volts 60hz.

  • 3.3" Diameter Motor

  • Motor Length less shaft: 3 1/8"

  • 6" wire leads-no plug

  • Air Over Motor

  • Open Ventilated

Nutone 22721, JB1C005N, JB1COO5

Clockwise
Shaft Size:
1/4" x 2 1/2"
Part # 36
$56.25
 

  • 1/40 HP

  • 1550 RPM

  • 2-Speed

  • 1.0/.70 amps 115 Volts 60hz.

  • Motor Length less shaft: 2 1/2"

  • Shaft Size: 5/16" x 2 1/2"

  • 3.3" Diameter Motor

  • Four Mounting Studs Both Ends

  • Wire leads-no plug

  • Air Over Motor

Universal Fan Motor Replacement such as Kitchen Exhaust Fans and many others

Shaft Rotation* Part # 81
$90.98  
 
 

 

Counter Clockwise


  • 1/30 HP

  • 3000 RPM

  • 3-Speed

  • 1.6/.74/.43 amps 115 Volts 60hz.

  • Motor Length less shaft: 2 1/2"

  • Shaft Size: 1/4" x 2 1/2"

  • 3.3" Diameter Motor

  • Four Mounting Studs Both Ends

  • Wire leads-no plug

  • Air Over Motor

Universal Fan Motor Replacement such as Kitchen Exhaust Fans and many others

Shaft Rotation* Part # 462
$62.22
 
 

 

Counter Clockwise


  • 1/45 HP

  • 1625 RPM

  • 1.3 amps, 115 volts 60hz

  • Shaft Size 1/4" x 1 1/2"

  • 3.3" Diameter Motor

  • Motor case length = 2"

  • 2 studs on back for mounting

  • 2-Prong Plug
    Broan Reference: 99080345, JA2C299
    5KSM84DFK169P, 99080037 (1700 RPM)
    Dimensional Drawing

Shaft Rotation*
$43.72
 

Counter Clockwise

  Part # 632

  • 1/130 HP

  • 1500 RPM

  • .45 amps, 115 volts 60hz

  • Shaft Size 5/16" x 1 1/8"

  • 3.3" Diameter Motor
    Fasco 7163-1845
    Vent 656, 293A, PV7896

Shaft Rotation* Part # D1159
$55.95
 
 

Counter Clockwise


  • 1/110 HP

  • 1480 RPM

  • .58 amps, 115 volts 60hz

  • Shaft Size 5/16" x 1 1/2"

  • 3.3" Diameter Motor

  • Two Mounting Studs on Back
    Fasco 7163-2593, 7163-9678
    663, 668, 763, 768, 661, 7701C
    Marley 7163-9677, 7163-9676
    JA2C523, JA2C523N
    Marley Motor for Berko bath fan 765

Shaft Rotation* Part # D1160
$43.98
 
 

 

Clockwise


  • 1/100 HP

  • 1500 RPM

  • .60 amps, 115 volts 60hz

  • Shaft Size 5/16" x 1"

  • 3.3" Diameter Motor
    Fasco 7163-9809, 7163-1541
    659 Vent
    8" Leads
    2 White leads
    1 Red lead Counter Clockwise shaft end
    1 Blue lead Clockwise shaft end

Shaft Rotation* Part # D1162
$94.23
 
 

Reversible


 


  • 1/50 HP

  • 1400 RPM

  • .73 amps, 115 Volts 60hz.

  • Shaft Size 5/16" x 1 5/16"

  • Motor length less shaft: 2 1/2"

  • 3.3" Diameter Motor
    Broan Reference 99080274, 99080273
    JA2M373, JA2C396, 9908273
    Dimensional Drawing

Shaft Rotation*  
$56.85
 

Clockwise

Part # 633

  • 1/88 HP
  • 1320 RPM
  • .60 amps 115 Volts 60hz.
  • Shaft Size: 1/4 "x 7/8"
  • Motor length less shaft: 2"
  • 3.3" Diameter Motor
  • Motor has no mounting Studs
  • Air Over Motor
  • 2-Prong 115 Volt plug
    Nutone Reference # 30434, C-30434
    65073, JA2C119, JA2C119H
    Dimensional Drawing

Shaft Rotation*

$41.65 

 

 

Clockwise

 

Part # 636



Click pic to enlarge
  • 1/70 HP
  • 1550 RPM
  • .60 amps 115 Volts 60hz.
  • Shaft Size: 1/4 "x 1 1/4"
  • Motor length less shaft: 2 1/8"
  • 3.3" Diameter Motor
  • 2-Prong 115 Volt plug
  • Air Over Motor
  • 4 Mounting studs on each side of motor
    Studs can be easily cut off if not needed
    Nutone Reference # 20370, 23405, 23388, 22809, C-58475
    Nutone 8662, 8832, 8833
    Fasco # D1109, JA2C028, JA2C028G, JA2C307, JA2C125, JA2C125G
    JA2C023
    Dimensional Drawing

Shaft Rotation*

$49.95 

 
 


Counter Clockwise

 


Part # 509



Click pic to enlarge
  • 1/60 HP

  • 1550 RPM

  • 2-Speed

  • .74 amps 115 Volts 60hz.

  • Shaft Size: 5/16 "x 1 5/16"

  • Motor length less shaft: 2 1/4"

  • 3.3" Diameter Motor

  • Leads only - No Plug

  • Air Over Motor

  • 2 Mounting studs - opposite shaft end
    999765, 998810
    JA2M198, JA2M199, JA2M279, JA2M280
    JA2M296, JA2M298, JA2M334, JA2M335
    JA2M336, JA2M341, JA2M347
    Dimensional Drawing

    Shaft Rotation *

$79.98
 

 

 

Clockwise

 

 

Part # 597



2 Mounting Studs both ends
  • 1/80 HP

  • 3000 RPM

  • .55 amps, 115 Volts 60hz.

  • Shaft Size: 1/4 "x 2"

  • Motor length less shaft: 2 1/2"

  • 3.3" Diameter Motor

  • Motor has (2) 6" long leads-no plug

  • Air Over Motor
    Nutone Reference # 16653,16759,
    22320, 22373, 26727, 23731, 26734
    Fasco # D228
    JA1C020, JA1C151
    Dimensional Drawing

Shaft Rotation*

$47.78

 
 

Clockwise

 

Part # 541



Click pic to enlarge
  • 1/75 HP

  • 1550 RPM

  • .60 amps, 115 Volts 60hz.

  • Shaft Size: 1/4 "x 2 1/2"

  • 3.3" Diameter Motor

  • 4 Mounting Studs - Both Ends

  • Motor has (2) 6" long leads-no plug

  • Air Over Motor

Shaft Rotation* Part # 540
$39.92
 

Clockwise
Motor length less shaft: 2"


Counter Clockwise
Motor length less shaft:
2 1/8"
Part # 370
$52.51
 


4 Mounting Studs both ends
Click to enlarge

  • 1/70 HP

  • 1550 RPM

  • .60 amps 115 Volts 60hz.

  • Shaft Size: 1/4 " x 2 1/4"

  • Motor length less shaft: 2 1/8"

  • 3.3" Diameter Motor

  • Air Over Motor

  • 2-Prong 115 Volt plug
    Nutone Reference # 26723, 26724, 26750, 26751, 26760, 26761, JA2C271, JA2C271G, C-53581, 53581, JA2C312
    JA2C134, JA2C024, JA2C354, JA2C354N
    JA2C312
    Dimensional Drawing

Shaft Rotation*

$52.45 

 

Counter Clockwise

 



Part # 510


Nutone Motor
2 Mounting Studs on Back
  • 1/75 HP

  • 1550 RPM

  • .60 amps 115 Volts 60hz.

  • Shaft Size: 1/4" x 1 3/16"

  • Motor length less shaft: 2 1/8"

  • 3.3" Diameter Motor

  • Air Over Motor

  • 2-Prong 115 Volt plug
    Nutone Reference #
    JA2C395N, JA2C395
    Dimensional Drawing

Shaft Rotation*

$39.45 

 
 

Counter Clockwise

 

Part # 637


  • 1/50 HP

  • 2800 RPM

  • 2-Speed Motor

  • .65 amps 115 Volts 60hz.

  • Shaft Size: 1/4 "x 1 1/4"

  • 3.3" Diameter Motor

  • Motor length less shaft: 2 9/16"

  • Motor has (3) 6" long leads-no plug

  • Air Over Motor
    Nutone Reference # 26732, 26733
    JA1M047
    Application: Range Hood
    Fasco # D1106
    Dimensional Drawing

Shaft Rotation*

$54.93 

 
 

Clockwise

 

Part # 496


Nutone Motor
  • 1/10 HP

  • 1550 RPM

  • 3.15 amps 115 Volts 60hz.

  • Shaft Size: 5/16" x 1 1/2"

  • 3.3" Diameter Motor

  • Motor length less shaft: 4"

  • Air Over Motor

  • No Studs - Belly band mount

  • Ball Bearings

  • 24" Cord Length - No Plug
    Nutone Reference #  32997, 67176
    JA2S034, JB2K016
    JB2S016, JB2S016N
    Fasco # D1107
    Dimensional Drawing

Shaft Rotation*

$89.73 

 

Counter Clockwise

 



Part # 621


Page | 1  | 2 | 3 | 4 | 5 | 6 | 78 |
This is Page 1          

 

1999-2014 All rights reserved Electric Motor Warehouse
Prices and data subject to change without notice
Electric Motor Warehouse is a registered trademark of Winans Inc.
“For specific trademark and copyright information regarding this site, contact my trademark and copyright attorney”

Trademarks & Logos are copyrighted property of their respective owners
We recommend that all electric motors be installed by a qualified licensed contractor.
Disconnect power before attempting to service any electrical apparatus
 

  Home | Contact us | Security | Policies |  Privacy |Testimonials