| Bison Dual Voltage PWM Speed Control - NEMA 4X |
View Drive Manual PDF
|
120 volts: 1/20hp to 1/3 hp
240 volts: 1/8 hp to 1/2 hp
Output amps: 3.0 DC
NEMA 4X enclosure: Protects against external corrosive material and incidental contact.
User adjustable calibration pots: IR compensation, min speed, max speed, current limit, acceleration and deceleration.
Diagnostics: LED for power on front of enclosure.
Stopping modes: Coast to a stop with power On/Off switch or via inhibit terminals (N.O.)
Speed range and regulation: 1% regulation over 100:1 speed range.
|
| Bison SCR Four Quadrant Regenerative Drives - NEMA 4X |
View Drive Manual PDF |
Speed range and regulation: 1% regulation over 50:1 speed range. 1% regulation over 60:1 speed range with the addition of a tachometer for feedback.
4 Quadrant reversing: Regenerative / 4 quadrant drives have the ability to perform quick, contactorless, reversing on-the-fly.
Stopping modes: User can decelerate (N.O.), regeneratively brake (N.O.) or coast the motor to a stop (N.O.). User can also decelerate t minimum speed (N.O.).
Cage Clamp terminal block: Quick and easy wire terminations.
User Adjustable calibration pots: IR compensation, forward torque, reverse torque, tachometer, min speed, max speed, forward acceleration, reverse acceleration, and deadband.
Additional Features: Dual voltage AC input, switch selectable armature or tachometer feedback mode and field supply for shunt wound motors.
Ob board fusing: No need to add external fusing for protection of your motor or drive.
*: Heatsink part-number 170-990-0200 required above 7 amp DC.
|
120 volts: 1/20hp to 1/3 hp
240 volts: 1/8 hp to 1/2 hp
Output amps: 3.0 DC
Reversing
|
120 volts: 1/20hp to 1/3 hp
240 volts: 1/8 hp to 1 hp
Output amps: 10.0 DC
Reversing
|
| Bison SCR Four Quadrant Regenerative Drives - Chasis
Mount |
View Drive Manual PDF |
120 volts: 1/20hp to 1/3 hp
240 volts: 1/8 hp to 1/2 hp
Output amps: 3.0 DC
Reversing
|
120 volts: 1/20hp to 1/3 hp
240 volts: 1/8 hp to 1 hp
Output amps: 10.0 DC
Reversing
|
| Bison Dual Voltage SCR Speed Control - NEMA 4X |
View Drive Manual PDF |
Accel/Decel range 0.5 to 17 seconds.
User adjustable calibration pots: IR compensation, min speed, max speed, torque, acceleration and deceleration.
Diagnostics: LEDs for power and current limit status.
Stopping Modes: Coast to minimum speed or to stop with selectable N.O. or N.C. inhibit contacts. Decelerate to minimum speed via the pot circuit. Braking on enclosed reversing models.
Spade and screw terminals: Easy to use spade terminals on chassis. Screw terminals on enclosed units.
Flexible inhibit: Select with jumper pins the preferred inhibit functionality.
*: Heatsink part-number 170-990-0100 required above 5 amp DC.
|
Input Voltage: 115/230 VAC 60/50 Hz, Single Phase
Output Voltage: 0-90 or 0-180 VDC
Output Amps: 1.5 DC
|
Input Voltage: 115/230 VAC 60/50 Hz, Single Phase
Output Voltage: 0-90 or 0-180 VDC
Output Amps: 10 DC
|
| BISON DUAL VOLTAGE SCR SPEED CONTROL - Chasis Mount |
View Drive Manual PDF |
Accel/Decel range 0.5 to 17 seconds.
User adjustable calibration pots: IR compensation, min speed, max speed, torque, acceleration and deceleration.
Diagnostics: LEDs for power and current limit status.
Stopping Modes: Coast to minimum speed or to stop with selectable N.O. or N.C. inhibit contacts. Decelerate to minimum speed via the pot circuit. Braking on enclosed reversing models.
Spade and screw terminals: Easy to use spade terminals on chassis.
Flexible inhibit: Select with jumper pins the preferred inhibit functionality.
|
Input Voltage: 115/230 VAC 60/50 Hz, Single Phase
Output Voltage: 0-90 or 0-180 VDC
Output Amps: 1.5 DC
|
Input Voltage: 115/230 VAC 60/50 Hz, Single Phase
Output Voltage: 0-90 or 0-180 VDC
Output Amps: 10 DC |
