Leeson Electric Motors

The Only Complete online Electric Motor - Swimming Pool Pump site on the Internet

Swimming/Pool Spa Pumps

Toll Free 1-877-986-6867

These blowers are common to many woodstoves and fireplace blower inserts
Be sure to scroll down the entire page
These Dayton Electric blowers / fans are sold as complete assemblies
We do not sell any parts for these units
Note: Blowers have wire leads, no power cords or plugs

KBWC Solid State Variable Speed Controls for Shaded Pole and Permanent Split Capacitor Motors

Click here for additional Fireplace Blowers

Dayton
Axial Fans
115volts · Cast Aluminum Housing · Ball Bearings

Dayton Axial Fan Part # 4WT42  (SJ1725HA1BAT)
3100 RPM   .42 amps
Dimensions H =6 3/4" W =5 7/8" D =2"
Mounting Holes = 6 3/8"
238 CFM  
(old # 4C720)
ship wgt 3 lbs.
$69.69 

 


Dayton Axial Fan Part # 4WT44   (SJ2509HA1BAT)
1650 RPM   .36 amps
Dimensions = 10" diameter
Mounting Holes 9 11/16"
550CFM 
(old # 4C688)
ship wgt 5 lbs.
$81.22

 


Low Profile Blower 

Dayton
Low Profile Blowers
Used in fireplace inserts, woodstoves, range hoods, and more
Show Blower Dimensions

Part # 1TDU7
   
 3200RPM  115 volts
127CFM
 .39 amps
(7021-6109, Fasco# A125)
old # 4C825
Overall length 14 5/8" 
Height 3 7/8"
Depth 3 5/8"
ship wgt 6 lbs.
$124.37 

Part # 1TDU8 2806RPM   115 volts   223CFM  1.25amps
(7021-6108)
Old # 4C826

Overall length 14¾"
Height 4 13/16"
Depth 3 5/8"
ship wgt 6 lbs.

$120.84 


Universal Fireplace Blower Fan

Fireplace Blower Fan Replacement

AO Smith Electric Motors
Universal Fireplace Blower Fan
Single Speed · CCW Facing the Shaft · 100CFM
120 Volts
· 60hz. · 2850RPM · .42 amps
Fan blade material-plastic
Keep in mind if "any" motor is placed in such a way
 that the fan blade will melt, the motor will fail also.

Impedance Protected
Mounting Bracket fits 4.12" B.C.D.
ship weight 5 lbs.
Part# C01574

 

$35.95


Universal Fan Motor Kit

Universal Bathroom Replacement

Bath Room Fan Replacement Motor Kit . 5 amps, 3000RPM, 115volts, 60hz
Motor is mechanically reversible.
Shaft = 3/16" x 1 3/8"
5/8" Coil stack · Continuous duty, Air Over
Shipped CW Shaft end
Mounting studs 1 7/8" on center.

Kit contains Motor, 2 fans (1=4", 1=5½"),
hub adapter, screws, H-bracket, washers
and wire nuts.
Cross Ref: Fasco K670, Universal J670, Dayton 4M987

Bath Room Fan Replacement Motor Kit . 65 amps, 3000RPM, 115 volts, 60hz
Motor is mechanically reversible.
Shaft = .181" x 1 15/8"
5/8" Coil stack · Continuous duty, Air Over

50 CFM Vent Fan Kit
Shipped CCW Shaft end
Mounting studs 1 7/8" on center.

Kit contains (1) 4½" Fan & Motor

Catalog # C01670
Cost   $24.91 
Also Available in
115/230 volts
5.5/1.1 amps
1 1/8" coil stack
Catalog #C01675
Cost    $25.77

Part # C01575   Cost   $22.53
 


 

Note: Dayton is changing the following blowers to new part #'s - The blower specifications are exactly the same.
As the old stock is depleted we will be shipping the new part #'s

Dayton
 High Temperature Blowers
Dayton High Temperature Blower
Handles Air Temperatures to 450º F
Show Hi Temp Blower Dimension Information

 Catalog # 

@ 0. 0SP

   Description   

Amps

Mfgr's # WGT

  Price 

.

4C940 68 3050 RPM 115Volts 60/50hz
New # 1TDU9 
0.7 7021-6774 4 lbs. $100.81

4C941 136 3200RPM 115volts 60/50hz
New # 1TDV2
1.5 7021-6560 5 lbs. $109.37

4C942 216 1700RPM 115volts 60/50hz
New # 1TDV3
Specification Sheet
1.3 7063-7161 10 lbs. $117.92

4C723 82 2300RPM 115volts 60/50hz
New # 1TDV1
1.1 7021-5538 5 lbs. $109.55

4YJ33
1TDV4
310 1650RPM 115volts 60/50hz
Old # 4C943 (7064-1678)
New # 1TDV4
Specification Sheet
0.86 7090-2379 10 lbs. $205.53


12 to 1210 CFM Dayton Electric Blowers
 

These Dayton blowers / fans are sold as complete assemblies - We do not sell any parts for these units
Show Blower Dimension Information

 

 Catalog # 

@ 0. 0SP

   Description   

AMPS Fasco
Equivalent
Mfgr's # WGT

 Price 

.

1C982

160CFM 1460RPM 115volts 60/50hz 1.00 50755-D500 7063-5179 6 lbs. $93.87

2C067

108CFM 1530RPM 115volts 60/50hz .65 7063-3293 5 lbs. $94.49


2C069 320CFM 1320RPM 115volts 60/50hz 1.27 50756-D500 7063-5182 10 lbs. $153.26


2C646 176CFM 1875RPM 12Volts DC  ----- 5.10 N/A 4 lbs. $65.47


2C647 134CFM 1500RPM 115volts 60/50hz .74 N/A 5 lbs. $70.49


2C782
1TDN2
12CFM   3340RPM 115volts 60/50hz
2C782 Discontinued
New# 1TDN2
.08 7021-1998 3 lbs. $59.83


2C914
1TDN8
49CFM 3037RPM 230volts 60/50hz
2C914 Discontinued
.25 7021-3482 4 lbs. $68.82


2C915
1TDP6
133CFM 2880RPM 230volts 60/50hz
2C915 Discontinued
.33 50752-D230 7021-3483 6 lbs. $99.88


2C916
1TDR1
160CFM 1460RPM 230volts 60/50hz .50 50755-D230 7063-5181 7 lbs. $105.34


2C917
1TDR8
358CFM 1550RPM 230volts 60/50hz
new # 1TDR8
Specification Sheet
.54 7008-6163 11 lbs. $173.91

2C946
1TDT4
805CFM 1090RPM 115volts 50/60hz.
new # 1TDT4
Specification Sheet
2.75 7051-2695 18 lbs. $227.85

4C004
1TDP1
89CFM 3010RPM 115volts 60/50hz .31 7021-3484 4 lbs. $74.03


4C006
1TDR6
150CFM 2450RPM 115volts 60/50hz .74 7021-4933 7 lbs. $86.74


4C012 54CFM 3340RPM 115volts 60/50hz .60 7021-3486 4 lbs. $66.71


4C015 157CFM 3180RPM 115volts 60/50hz .98 7021-4932 5 lbs. $109.55


4C054
1TDT5
975CFM 1020RPM 115volts
new # 1TDT5
Specification Sheet
3.5 7051-2676 23 lbs. $236.84

4C440
1TDN7
50CFM 3030RPM 115volts 60/50hz
old # 1C180, 4C440
.42 7021-3466 4 lbs. $70.37


4C441 60CFM 3030RPM 115volts 60/50hz .42 7021-4930 4 lbs. $65.16


4C442
1TDP5
131CFM 2860RPM 115volts 60/50hz
old # 2C610
.65 50752-D500 7021-3467
7021-2001
6 lbs. $92.81


4C443
1TDP3
75CFM 2870RPM 115volts 60/50hz
Permanent Split Capacitor
.45 7021-4931 4 lbs. $79.92


4C444
1TDR7
485CFM 1650RPM 115volts 60/50hz
new # 1TDR7
Specification Sheet
1.35 7008-6162 11 lbs. $153.02

4C445 495CFM 1570 RPM 115volts 60/50hz
old # 2C906, 2C962
new # 1TDT2
Specification Sheet
3.25   7008-6133 13 lbs. $174.47

4C446
1TDP7
146CFM 3100RPM 115volts 60/50hz
old # 4C005
.75 7021-3469 6 lbs. $85.25


4C447
1TDR3
273CFM 1640RPM 115volts 60/50hz
New # 1TDR3
Specification Sheet
1.86 B45227 7063-3277 9 lbs. $98.58


4C448
1TDR9
358CFM 1530RPM 115volts 60/50hz
old # 4C264
New # 1TDR9
Specification Sheet
2.90 B45267 7063-5176 10 lbs. $119.10

4C565 435CFM 1450RPM 115volts 60/50hz
2 Speed
New # 1TDT6
Specification Sheet
2.17 7063-5243 11 lbs. $127.10

4C566
1TDT7
480CFM. 1525RPM 115volts 60/50hz
2 Speed
New # 1TDT7
Specification Sheet
3.55 7008-6164 13 lbs. $176.70

4C668
1TDT9
745CFM. 794RPM 115/230volts 60/50hz 
PSC Blower
New # 1TDT9
Specification Sheet

 
2.75 7086-0200 33 lbs. $261.95

4C754 200CFM 1400RPM 115volts 60/50hz 2.10

B47120

7063-5673 10 lbs. $135.04


4C759 12CFM 3300RPM 115volts 60hz .35 7002-0127 2 lbs. $43.46


4C760 31CFM 3010RPM 115volts 60hz .45 7002-0090 3 lbs. $53.57


4C761
1TDN4
49CFM 3034RPM 115volts 60hz
4C761 discontinued
.50 7002-0091 3 lbs. $54.75


4C762 72CFM 2930RPM 115volts 60hz .55 7002-0092 4 lbs. $60.02


4C763 98CFM 2870RPM 115volts 60hz 1.55 7002-0472 5 lbs. $71.80


4C830
1TDU1
990CFM. 1080RPM 115/230volts 60/50hz 
 
PSC Blower
New # 1TDU1
Specification Sheet
3.66 7086-0201 23 lbs. $274.66

4C831 1210CFM.  1400RPM 115/230volts 60/50hz 
PSC Blower
New # 1TDU2
Specification Sheet
8.60 7024-0788 22 lbs. $290.78

4C869
1TDR4
271CFM 1610RPM 230volts 60/50hz
New # 1TDR4
Specification Sheet
.93 B45227-2 7063-7019 9 lbs. $112.47


4C870
1TD3T
559CFM 1600RPM 230volts 60/50hz
New # 1TDT3
Specification Sheet
.98 7008-6481 15 lbs. $172.55

4YJ31 382CFM 1550RPM 115volts 60/50hz
New # 1TDR7
1.21 7090-2377 10 lbs. $163.43

4YJ32
1TDT2
555CFM 16400RPM 115volts 60/50hz
old # 4C667, 4YJ32
New # 1TDT2
2.05 7090-2378 10 lbs. $180.48

5C507 465CFM 1530RPM 230volts 60/50hz
New # 1TDT1
Specification Sheet
1.30 7063-8831 10 lbs. $129.33

5C508 545CFM
.
1450RPM 115volts 60/50hz
2 Speed
3.20 7090-1184 13 lbs. $251.10

WGT = Approximate Shipping Pounds

( dayton electric blower page )

© 1999-2008 All rights reserved Winans Inc.
Prices and data subject to change without notice
Electric Motor Warehouse is a registered trademark of Winans Inc.
“For specific trademark and copyright information regarding this site, contact my trademark and copyright attorney

Trademarks & Logos are copyrighted property of their respective owners
We recommend that all electric motors be installed by a qualified licensed contractor.
Disconnect power before attempting to service any electrical apparatus
 

  Home | Contact us | Security | Policies |  Privacy | Testimonials