Beckett Ice Machine Pump

All Purpose Ice Machine Pump-Replaces most Pumps
Replacements for: Scotsman, Manitowoc, Ice-O-Matic (Mile High), Crystal Tips, York and Ross Remp, Hertell, Frigidaire

1/30hp Dual Voltage 115/230volts, 1.35/.66 amps., 50/60hz.
RPM 3165, Sealed Ball Bearings
Overall Height 9 3/8" (Not including top studs)

Five Discharge Adapters: 1/2", 5/8", 3/4", 1", "Y"
Three Impellers: 1.75" dia., 1.955" dia., 2.10" dia.
Check Valve: No
Tubing: No
Safety Switch: No
Bracket or Cup: No
UL or CSA Rating: No
Cord Length: 32"
Thermally Protected Motor
Ship Weight 6 lbs.

Disassembly Procedure: REQUIRED ONLY when using your existing mounting bracket and/or replacing the impeller, motor etc.
1. Remove base plate by pressing tabs with thumbs or tapping gently with plastic mallet.
2. Press impeller against pump stand and remove impeller nut and screw.
4. Remove impeller.
5. Remove thumb nuts and washers.
6. Remove pump stand.
Note: These instructions come with the pump, includes reassembly procedure

We do not have replacement motors for these ice machine pumps

Replacement Ice Machine Pumps

	Voltage	Discharge OD inches	GPH of Water @ 2'	Shut- Off (ft.)	Bracket /Cup	Fits	Beckett #	Our #	Cost
	115	1	630	9.5	yes	Crystal Tip	M15-1	2P789		discontinued
	230	1	630	9.5	yes	Crystal Tip	M15-2	2P790		discontinued
	115	1/2	165	6.5	--	Scotsman	S5-1	2P785		discontinued
	115	3/4	350	6.5	--	Scotsman	S8-1	2P786		discontinued
	115	1/2	220	9.0	yes	Manitowoc	MA5-1	2P787		discontinued
	230	1/2	220	10.0	yes	Manitowoc	MA5-2	2P800		discontinued
	115	1	770	10.5	yes	Manitowoc	MA8-1	2P788		discontinued
	230	1	770	9.5	yes	Manitowoc	MA8-2	2P793		discontinued
	115	1/2	160	3.5	yes	Ice-O-Matic	MH1-1A	2P791		discontinued
	115	5/8	160	3.5	--	Ice-O-Matic	MH1-1B	2P784		discontinued
	115	5/8	345	9.0	--	Ice-O-Matic	MH3-1B	2P792		discontinued
Approximate ship weight on above pumps 6 lbs.