|
Convenient Stand Mounts Under Motor |
Example of Above Ground
Pool Pump with Timer
 |
|
Click picture to Enlarge |
Bottom of pump stand is
designed to be placed under an above ground pool pump motor.
The holes are the same as the motor base. The bottom of the timer box contains one
electrical input plug for your pump.
Timer can be used for many uses, not just the pool pump, such as Christmas lights,
garden lightening and many other applications that you desire to control by a timer. |
- Stand material = Metal
- Timer Housing = Plastic
- Power Cord Length = 24"
- Overall Height = 15"
- 4 positions per hour 915 minute increments)
- 15 amp Rating (not recommended for 2hp pump)
- 115 Volt 60hz.
- 3-Prong Ground Plug
|
|
|
|
Determine how long you
should run your system. The length of time that you run your pool's
filtration system each day depends on your equipment, the environment, and
the time of year. To determine how long you should run your system during
the summer, start by running it for 10 hours each day. Observe it for
three days. If the pool is clean and clear, reduce the run time by one
hour and once again observe it for three days. Once you've reduced the run
time and the pool is no longer clean and clear, increase the run time by
one hour, and repeat the process until it is once again clear. |
| |
