Leeson Electric Motors

The Only Complete online Electric Motor - Swimming Pool Pump site on the Internet

Swimming/Pool Spa Pumps

Toll Free 1-877-986-6867

Waterway Plastics Swimming Pool Pumps

Tiny Might Circulation Pump
for spas and hot tubs

Attention: We no longer sell the Tiny Might pump. We recommend replacing the Tiny Might with the Iron Might pump. It is a larger pump and is not as susceptible to premature seal failure as the Tiny Might.
 
  • Larger, 303 stainless steel, 3/8" motor shaft improves impeller stack-up height and won't rust.
  • Larger motor bearings for longer life.
  • Designed for 24 hour operation.
  • Larger motor housing improves ventilation and keeps motor cooler.
  • New wet-end made of state-of-the-art plastic material.
  • Higher capacitor rating allows easy starting when low voltage is encountered.
  • High quality John Crane seal.
  • Energy efficient (uses less power than a 100 watt light bulb.
  • 1180 gallons per hour GPH @ 4' head
  • Manufactured by Waterway Plastics, Oxnard, California   Made in USA
  • Uses: Water circulation for spas and hot tubs, Koi Ponds, Aquariums and waterfalls
  • Overall Length = 10.25"  Height = 6"
  • Unions not included  - Sold Separately

Waterway Tiny Might Circulation Pump - Hose Barb
Hose Barb Connections

Waterway Tiny Might Circulation Pump - Unions
Threaded Union Connection

Note: Tiny Might pumps seals are very susceptible to damage from pool chemical imbalances. Be sure to keep your ph levels at the correct balance. Failure to do this will result in premature seal failure, which will damage the motor bearings.
This is true with all the small circulation pumps such as the Lange and Grunfos pumps. They are designed to operate at 10 to 15 GPM @ 2 to 3 PSI. Motor damage as a result of this is not covered under warranty. It is the end users responsibility to maintain the proper water chemistry. The seals are not replaceable.
Also, pumps that have been tampered with, including pump disassembly, will void the warranty.
 
   

 Catalog # 

  Description  

  

Threaded Inlet/Outlet

3312610-14 Waterway Tiny Might 115 Volt
1/16 HP, 0.8 Amps, 60 Hz, 3200 RPM
1 7/8" Thread / 1/2" slip X 1 7/8" Thread / 1/2" slip
Model Number: TM-0061N11C
We no longer stock these
We now sell the Iron Might Pump
3312620-14 Waterway Tiny Might 230 Volt
1/16 HP, 0.4 Amps, 60 Hz, 3200 RPM
1 7/8" Thread / 1/2" slip X 1 7/8" Thread / 1/2" slip
Model Number: TM-0061N22C3
 1" Barb Hose Connection
Barb fitting accepts 1" flexible pipe
3312610-19 Waterway Tiny Might 115 Volt
1/16 HP, 0.8 Amps, 60 Hz, 3200 RPM
1" Barb X 1" Barb
Model Number: TM-0061N11C
We no longer stock these
We now sell the Iron Might Pump
3312620-19 Waterway Tiny Might 230 Volt
1/16 HP, 0.4 Amps, 60 Hz, 3200 RPM
1" Barb X 1" Barb
Model Number: TM-0061N22C3

© 1999-2011 All rights reserved Winans Inc.
Prices and data subject to change without notice
Electric Motor Warehouse is a registered trademark of Winans Inc.
“For specific trademark and copyright information regarding this site, contact my trademark and copyright attorney

Trademarks & Logos are copyrighted property of their respective owners
We recommend that all electric motors be installed by a qualified licensed contractor.
Disconnect power before attempting to service any electrical apparatus
 

  Home | Contact us | Security | Policies |  Privacy | Testimonials