ABOVE-GROUND SWIMMING POOL WINTERIZING ACCESSORIES

POOL COVER CLIPS

KEEPS YOUR ABOVE-GROUND COVER IN PLACE!
These handy fasteners are tough! They grip your top rail like a clothespin and hold your cover on tightly. Use two clips per upright.

To help determine how many Pool Cover Clips are needed for your swimming pool size, refer to our Cover Clip Chart.

COVER LOC JR.™

UNIQUE Pool COVER LOCK SYSTEM IS SUPERIOR TO ONE-PIECE CLIPS!
This deluxe two-part covers lock system will not pull off in the strongest winter winds. Just snap together the 5" male and female clips and your pool cover will stay firmly secured. Invest in the Cover Loc Jr. and extend the life of your winter cover! Perfect for high-wind areas. Use a minimum of three clips per upright. Available in 12-packs.

WINTER POOL COVER SEAL

ELIMINATES DAMAGE TO YOUR WINTER POOL COVER DUE TO HIGH WINDS

This is a simple solution to wind getting under your winter pool cover and causing damage and premature wear and tear. Winter Pool Cover Seal is a unique blend of tough poly blend film that wraps around your swimming pool to seal out winter gusts. The secret to Pool Cover Seal is a special blend of resins that enables this unique material to stretch and hold tightly over a long period of time, even during extreme cold weather. Pool Cover Seal is also packed with U.V. inhibitors so that the sun will not weaken it.

Since Winter Pool Cover Seal creates an airtight seal, your swimming pool water will be crystal clear next spring, and you can expect a longer life from your winter pool cover. One box of Pool Cover Seal will wrap around a 24’ round above-ground pool six times – order 2 boxes for larger pools. Click Here to help determine how many boxes you desire for your pool.

AIR PILLOW

For Above-Ground Swimming Pools

This rugged 16-gauge vinyl pillow absorbs freezing water’s pressure and helps protect your swimming pool walls. The Air Pillow also reduces excess rain, snow, and leaves on your winter pool cover.

WALL BAGS

HOLD YOUR POOL COVER DOWN, EVEN IN HIGH WINDS!
These handy wall bags help hold your pool cover down in high winds and protect it from wind whip and damage. Our bags are made of heavy-gauge vinyl and are easily filled with water using a garden hose. They are designed to lie on top of the pool cover around the inside perimeter of your pool. Rugged grommets on top of each bag allow you to fasten them to your pool cover's cable. Use one wall bag every 2-3 feet. Anchor your winter pool cover this year with wall bags!

POOL COVER DRAIN

ECONOMICAL SIPHON QUICKLY EMPTIES WATER OFF YOUR WINTER POOL COVER!

This simple device economically pumps the water off your above-ground swimming pool cover without electricity. Squeeze operated pump begins the flow of water and it stops automatically when the pool cover is drained. The unit comes with drain, pump and siphon and 13-feet of hose.

ABOVE-GROUND POOL COVER PUMPS

These powerful pool cover pumps remove unwanted water from your winter pool cover – fast! Pumps up to 350 Gallons per Hour! Both pumps are fully submersible, come with a reusable foam inlet filter and a stabilizing base platform. They will remove water to within 1/8” of the pool cover & come complete with garden hose adaptor & 25 feet of power cord.

We sell our Above-Ground swimming pool cover pumps in two models:
Standard model with manual on/off and an Automatic model that turns the pump on & off depending on the water level in your pool. Both pumps are UL approved.

AQUADOR™

PROTECTS YOUR SWIMMING POOL FROM FREEZE DAMAGE - WITHOUT DRAINING!

This time-saving closure device saves time and money when you winterize your pool. Simply replace your skimmer plate with the Aquador face plate and snap on the freeze-proof plastic closure. Your pool skimmer is now protected from freeze damage. Aquador eliminates the need for costly drain downs in the fall. Our three models fit most above-ground pool skimmers.

Click here to see the bolt patterns for each of the Aquadors we sell. Make sure that you purchase the one that matches your skimmer.

ABOVE-GROUND SKIMMER GUARD

PROTECT YOUR POOLSKIMMER FROM FREEZE DAMAGE!

Just place the Skimmer Guard into your skimmer to absorb any expansion caused by freezing water. The freezing water will actually compress the Skimmer Guard instead of expanding outward and cracking your skimmer. The bottom of the Skimmer Guard fits either a 1-1/2" or 2" internal thread.

POOL COVER CABLE & WINCH

Rugged plastic coated steel cable for use in replacing your worn or broken pool cover cable. The winch is used for tightening the cable to secure your cover. Our winch is made of durable metal that will not rust.

Click here to determine what size cable you need for your above-ground pool size.

WINTER COVER PATCH KITS

Repair minor damage to your winter cover with this handy patch kit. The kit contains five 3” x 7” self-adhesive patches that will adhere to your winter cover and remain stuck during rain and snow. Patches can also be cut to size to fit smaller holes.