|
Air Conditioner Fan Motor
For RV's (Recreational Vehicles)

115 volts
*
60hz
Automatic Overload Protection
Sleeve Bearings
-
Continuous Duty
-
Class B Insulation
Note: These are the only motors we sell for the RV Air
Conditoners - We do not have RV Furnace Motors

See dimension reference drawing at bottom of page |
Coleman

Duotherm |
|
Show Connection Diagrams |
|
Catalog
# |
Description
|
| ORV4537 |
1/4 HP, 115V, 1625 RPM, 1 speed, 2.8 Amps
CW lead
end Rotation
Direct Replacement for Coleman 6747A311. Semi-enclosed,
Uses 7.5MFD/370V Capacitor
(included)
Double Shaft Extension. No bracket on motor, round body. Motor
has 2 studs on each side of the motor (opposite on each side, spaced
2.25"
On Center)
Diameter = 4.75"
Dimensions ref. (1) C = 14-3/4", BM = 3-5/8",
N1 = 5-1/4", N = 5"
Also replaces 322P664
ship weight 9 lbs. |
|
| ORV4538 |
1/4 HP, 115V, 1625 RPM, 2 speed, 3.1 Amps
CW Lead End
Rotation
Direct Replacement for Coleman 6757B311.
Semi-enclosed, Mounting Bracket.
Uses 7.5MFD/370V Capacitor
(included)
Double Shaft Extension.
Dimensions ref. (1) C = 15-1/4", BM = 3-5/8",
N1 = 5-3/8",
N = 5-3/8". Also replaces 322P708
ship weight 10 lbs. |
|
|
ORV4539 |
1/3 HP, 115V, 1675 RPM, 2 speed, 3.4 Amps
CW Lead
End Rotation
Direct Replacement for F42B50A01, 1468A304
Semi-enclosed,
Mounting Lugs.
Uses 7.5MFD/370V Capacitor
(included)
Double Shaft Extension. Motor Diameter = 4 7/8"
Dimensions ref. (1) C = 14-5/8", BM = 3-7/8",
N1 = 6-3/4",
N = 3-1/4". Also replaces F42B50B50,
7184-0118
ship weight 11 lbs. |
|
|
ORV4540 |
1/5 HP, 115V, 1650 RPM, 3 speed, 2.5 Amps
CCW Lead
End Rotation, PSC
42 FR. Direct Replacement for F42C40A61, Domestic ( Duotherm
)
#3105054.005. Semi-enclosed. Opp. Lead End, 3 "Ear" Brackets
with .56" diameter holes and grommets on 6" bolt circle.
One extended stud on lead end.
Uses 5MFD/370V Capacitor (included)
Auto Protector, 40 Deg. C Ambient.
Motor diameter = 4 7/8"
Dimension ref. (1) C = 10-1/2", BM = 4", N = 2. 1/4",
N1 = 3-5/8". Also replaces F42B34A61
ship weight 11 lbs. |
|
|
|
|
 |
BM = Motor Case Thickness
N & N1 = Shaft Length |
|