Leeson Electric Motors

The Only Complete online Electric Motor - Swimming Pool Pump site on the Internet
Toll Free 1-877-986-6867
Burton, Michigan USA 48529

Swimming/Pool Spa Pumps

Century Electric Motors

Fuel Oil Burner Electric Motors

Oil Burner Motor Dimensions

Features: NEMA oil burner flange for direct-coupling to domestic oil burners.
Quick change reversing terminals for versatile mounting and 20" long leads.
All-angle, self-aligning sleeve bearings provide long service and quiet operation.
Manual reset thermal protection.
UL recognized, CSA certified Continuous Duty 1.0 Service Factor 40C Ambient Temperature

Note: Pay careful attention to the Frame number you have: 48N, 48M, 56N
Century Catalog Page


"Switchless" Oil Burner Motor

The new switchless design eliminates the use of an internal starting switch and governor for greater dependability.
Use of a PSC design allows for higher efficiencies with 40% lower amp draw.
Cooler operation results in fewer failures and reduced service calls.
Ball bearings provide smooth, quiet operation and extended motor life.

Permanent Split Capacitor Design Ball Bearing Construction Automatic Overload Protection
Direct replacement for Beckett oil burners with part # 21805U
Also Replaces: Carlin 98022S, Marathon 0701, Emerson 3248
AF/AFG Burners, B2001, B2003, B2004 Chassis

Catalog #

  Description

OBK6002V1 1/7 HP 3450 RPM 48M Frame
Shaft = 1/2" x 1 13/16"
18" Leads
1.7 amps, 115 Volts
Rotation = CCW facing shaft
Non-reversible
Ship Weight 8 lbs.
Dayton 4GZK2
View Dimensional Drawing
$48.98

AO Smith Oil Burner Motors
Split Phase Ventilated Flange 115 Volts Totally Enclosed Oil Burner Motor

Catalog #

  Description

EL2002V1 1/7 HP 3450 RPM 48M Frame
2.8 amps, 115 Volts
Shaft = 1/2" x 1 13/16"
20" Leads
Manual Thermal Protection
Shaft Rotation = CW facing shaft
Dayton 4MA16

Ship Weight 10 lbs.
View Dimensional Drawing
$68.98
EL2002 1/7 HP 3450 RPM 48M Frame
2.8 amps, 115 Volts
Shaft = 1/2" x 1 13/16"
20" Leads
Manual Thermal Protection
Shaft Rotation = Reversible
Dayton 4MA18
$69.61
EL2022 1/4 HP 3450 RPM 48N Frame
3.5 amps, 115 Volts
Shaft = 1/2" x 1 13/16"
20" Leads
Manual Thermal Protection
Shaft Rotation = Reversible
OLD # 6K315, Dayton 4MA18
Ship Weight 18 lbs.
View Dimensional Drawing
$91.98
OL2032 1/3 hp 3450 RPM 48N Frame
4.9 amps, 115 Volts
Shaft = 1/2" x 1 13/16"
12" Leads
Manual Thermal Protection
Shaft Rotation = Reversible
OLD # 6K705, Dayton 4MA26A
Ship Weight 17 lbs.
View Dimensional Drawing
$116.75

Split Phase Ventilated/Non-Ventilated Flange (plastic flange cover) 115 Volts Totally Enclosed

Catalog #

  Description

EL2005 1/8 HP 1725 RPM 48N Frame
2.5 amps, 115 Volts
Shaft = 1/2" x  13/16"
20" Leads
Manual Thermal Protection
Shaft Rotation = Reversible
Ship Weight 9 lbs.
View Dimensional Drawing
$72.87
EL2004V1 1/8 HP 1725 RPM 48N Frame
2.6 amps, 115 Volts
Shaft = 1/2" x  13/16"
20" Leads
Manual Thermal Protection
Shaft Rotation = Reversible
Ship Weight 8 lbs.
View Dimensional Drawing
$83.29
EL2012 1/6 HP 3450 RPM 48M Frame
2.7 amps, 115 Volts
Shaft Rotation = Reversible
Ship Weight 11 lbs.
View Dimensional Drawing
$88.71
EL2014V1 1/6 HP 1725 RPM 48N Frame
3.1 amps, 115 Volts
Shaft = 1/2" x  13/16"
20" Leads
Manual Thermal Protection
Shaft Rotation = Reversible
(
4MA12, 5K501)
Ship Weight 15 lbs.
$87.70

Split Phase Non-Ventilated Flange 115 Volts Totally Enclosed

Catalog #

  Description

EL2024 1/4 hp 1725 RPM 48N Frame
3.7 amps, 115 Volts
Shaft = 1/2" x  13/16"
20" Leads
Manual Thermal Protection
Shaft Rotation = Reversible
Dayton 4MA28
Ship weight 17 lbs
View Dimensional Drawing
$114.72
EL2034 1/3 hp 1725 RPM 48N Frame
4.3 amps, 115 Volts
Shaft = 1/2" x  7/8"
Terminal Board
Shaft Rotation = Reversible
Dayton 4MA30
Ship weight 21 lbs.
View Dimensional Drawing
$106.66

Capacitor Start Ventilated Flange Oil Burner Motor 115/230 Volts

Catalog #

  Description

OL2052D

1/2 hp 3450 RPM 48N Frame
8.2/4.1 amps, 115/230 Volts
50/60hz.
Shaft = 1/2" x  13/16"
12.25" Leads
Shaft Rotation = Reversible
OLD # 6K547, Dayton 4MA24
Ship Weight 16 lbs.
View Dimensional Drawing
$127.36

OL1072D

3/4 hp 3450 RPM 48CZ Frame
10.0/5.0 amps, 115/230 Volts
Shaft = 5/8" x 2.06"
Shaft Rotation = Reversible
Dimension Drawing
Ship Weight 18 lbs.
$147.98

1999-2014 All rights reserved Electric Motor Warehouse
Prices and data subject to change without notice
Electric Motor Warehouse is a registered trademark of Winans Inc.
“For specific trademark and copyright information regarding this site, contact my trademark and copyright attorney

Trademarks & Logos are copyrighted property of their respective owners
We recommend that all electric motors be installed by a qualified licensed contractor.
Disconnect power before attempting to service any electrical apparatus
 

  Home | Contact us | Security | Policies |  Privacy |Testimonials